When you need to produce precision micro plastic parts, you will necessarily begin to approach specialist moulding companies, and most likely the ones that brand themselves as micro moulders. As the drive towards miniaturization continues apace, more and more companies are initiating conversations with suppliers that seemingly hold the keys to their product success. The route to market is typically through the use of a micro moulding partner. This is because even if the cost of investing in the technologies necessary to make precision plastic parts were not deemed prohibitive, the knowledge and experience necessary to operate them in a world where single micron tolerances are the norm is very rare indeed.
So the success of a product development program now becomes a lesson in supplier selection not technology selection. And in the area of micro moulding, a supplier is so much more than just a moulding company. It is a company with in-depth design experience, a material expert, a tooling expert, a validation expert, and of course a production and assembly expert.
SIZE CAN BE EVERYTHING
OK, so you’ve looked under the bonnet, and you have seen evidence of true vertical integration for yourself. So far so good. But what about the size of the operation you are dealing with?
You see, capabilities are only one part of the equation. Just as important are scalability and sustainability. Your chosen supply partner may have ticked all the vertical integration boxes, but in terms of production, is the infrastructure big enough to support your volume requirements over an extended period of time? You see, some customers require millions and millions of parts with a continuity of supply running over years. Put quite simply, without the space to accommodate this scale of supply and the associated manufacturing cells, then your chosen partner may be found wanting.
Also, to sustain supply over many years, you need to be persuaded of the robustness of the supply partner that you are dealing with. How long have they been in business, how deep are their pockets, can they survive recessionary (or pandemic-associated) downturns?
A good barometer here is how long your chosen supply partner has been in business as a micro moulder or precision plastic part producer. Some suppliers may boast a long pedigree, but ask how long they have been producing real parts, as some businesses have a foundation in precision engineering that goes back years, but are relatively new when it come to actually producing micro and precision plastic parts. Also take a look at turnover. You will see from this which companies are operating at scale and which are relative minnows.
Only with decades of micro plastic part production under its belt will a supplier have the experience and strength and breadth of knowledge to tackle the most exacting of customer applications. Yours does not want to be the first project of its kind that you supplier deals with. Ask for evidence of longevity of manufacturing, and also look for evidence that your supplier has been around the block numerous times with projects such as yours.
LET’S WORK THIS OUT TOGETHER
We have described micro plastic part suppliers as your “partners” in product development, and this is a word used advisedly. The relationship you have with your chosen supplier should be a true product development partnership, and this demands a healthy client supplier relationship.
This is your project. As such, you want to remain in touch, involved, and influencing outcomes, not just handing over control to your chosen micro plastic part expert who holds all the secret sauce. Yes, you are working with your chosen partner as they have the expertise, capabilities, scalability, and sustainability to see your project through. But you must insist upon — and see evidence of — collaboration and transparency in client supplier dealings.
Your chosen micro moulder should have a solutions-oriented focus, and a demonstrable reputation in the various industry sectors for high quality, timely, and cost-effective results.
MORE ABOUT CAPABILITIES
We placed an emphasis on vertical integration earlier in this article, and this is all about the capabilities that your chosen supplier has in-house. Let’s delve a little more closely into the capabilities that will back up the ability to scale up and sustain mass manufacture of micro plastic parts.
Design and material expertise are pretty fundamental to success. As mentioned earlier, true micro plastics part producers are selling DfMM expertise not plastic parts, and your chosen micro moulding supplier should be able to intervene to optimise manufacturing outcomes. Without this ability, and without the ability to be able to advise on the best approach for any given application, there is an increased chance that time and money will be lost due to the need for design re-iterations, and even more seriously the need to adapt hard tooling. Your micro moulding partner should be able to enhance the innovative nature of your micro plastic parts by intelligent design input in the early stages of product development.
The ability to fabricate micro tooling in-house is also critical. Some see micro tooling as the key enabling technology for successful micro moulding success, so be careful to see evidence of experience and the routine attainment of micron tolerances. Be aware, however, that extensive experience in micro tooling without a similar level of experience in micro moulding can be an issue.
Micro moulding is an obvious capability to examine, but look beyond the obvious evidence of micro moulding machines, and seek evidence of a consistent and long track record of micron tolerance attainment. Ask how many and what micro moulding machines your supplier has in-house.
Then there is the new kid on the block, micro AM. Micro AM can cater for customers requiring low- to medium-sized runs, as the same economies of scale do not exist when using AM as compared to traditional moulding technologies. Micro parts with geometric complexity either impossible or prohibitively expensive using the micro moulding process can also be made. However, it is in the area of direct rapid soft tooling (DRST) that there are huge future opportunities.
The accuracy of today’s micro AM technologies, and the robustness of the materials used mean that the technology can produce DRSTs that can be used on traditional moulding machines. This unlocks new business possibilities for customers as it means that they no longer need to rely on long lead time and expensive traditionally manufactured mould tools for prototype runs all the way through to mass manufacture. Micro AM stimulates the business case for a process chain that includes DRST, with the possibility of dramatically shorter lead times from file to injected part and at costs reduced from thousands of dollars to tens. This will be a game changer for some projects, and should be on your shopping list of supplier capabilities.
Your chosen partner must also be able to validate the accuracy of parts made. This requires a suite of top-end metrology solutions, both in the lab and also in-process. Without the ability to measure often geometrically complex and tiny parts with absolute precision, it will be impossible to prove the attainment of design intent, and this will render parts made useless.
Finally, make sure that your micro moulding partner has the capacity and ability to provide customized automated assembly in-house. Your chosen partner must be able to demonstrate an understanding of — and experience in — the art and science of micro assembly, with a focus on minimising the level of handling, as at each stage tolerances can be affected.
SUMMARY
The key to success in supplier selection is to see evidence. Claims are easily made, but when you seek evidence of experience, longevity, vertical integration, capability, scalability, and sustainability, it is a little harder to gild the lily. Don’t be shy about asking questions, and where possible, visit your shortlisted suppliers. You are about to embark on a project that may cost hundreds of thousands of dollars, so scrutiny is essential and should be welcomed by your product development partner.
www.accu-mold.com